Matrix SF Rainscreen Cladding

The CWCT tested Matrix SF rainscreen system is a high tolerance fabricated panel generally supplied in 3mm thick which is dictated by the material type and panel size.

Our rainscreen facade systems provide an aesthetically pleasing external envelope solution whilst also offering rapid installation times. PSP provide a comprehensive range of integrated metal rainscreen facade systems that can be adapted to suit specific client needs and provide a solution for almost any building type.

The CWCT tested Matrix SF rainscreen system is a high tolerance fabricated panel generally supplied in 3mm thick which is dictated by the material type and panel size.

Special features, pressings and louvers can be manufactured from single skin material ensuring it matches that of the panels.

This rainscreen system is ideal for integrating perforations into the panel; these can be designed to integrate anything from uniform lines to random patterns or pictures.

PSP’s Matrix SF rainscreen system is available in a range of materials such as COR-TEN®, Stainless Steel and Aluminium. The most suitable type of secondary support structure is generally dictated by the panel orientation along with the ability to incorporate thermal and floor movements where required.

Benefits of Matrix SF

Technical Details

Fire Rated Materials and Finishes:
Solid aluminium classified as non-combustible | Solid zinc classified as non-combustible | Post powder coated classified A2 fire rated | Pre-coated classified A1 fire rated | Anodised aluminium classified as non-combustible

Visible Material Face:
COR-TEN®, stainless steel or pre-coated aluminium

Finish:
PSP offer many different finishes dependent upon material used

Fixing:
Secret / discreet fix method

Joints:
Nominal 20mm vertical and horizontal joints

Support:
PSP Matrix T Grid system

Ancillaries:
Fixings to enable connection between bracket and rail and panel to rail by PSP. Main fix from bracket to structure will be done by installers

Downloads

PSP Hook on System

PSP are able to offer a range of support grids to suit most cavity build ups. It is essential that the correct system is utilised to ensure it can allow for thermal and floor movement. It is essential that care is taken when installing the grid to ensure the accuracy require to accommodate the relevant panel system. Accurately fitted grid will ensure a trouble free installation of the panels.

The Hook on system can be used for any panel orientation where thermal and floor movement is occurring. The spring loaded offset head dowels allow for these to be inserted anywhere on the rail and do not have to be slid down the whole length. The spring itself will ensure the dowels do not fall to the bottom.

Fixing Details:


Matrix SF Carrier System:


The “T” Rail system is probably our most popular system. Brackets are manufactured in house accommodating most cavity depths. The system is fitted vertically and best utilised where panels are horizontally laid however it can accommodate horizontal panels with rails at each vertical joint and/or the introduction of a z/top hat.

T Rail’ Secondary Support Carrier System:

Our ‘T Rail’ Secondary Support Carrier System is designed for ease of installation and versatility of use. Typical facade systems and materials may be fixed to the secondary support carrier including Honeycomb Core, Coated Aluminium, High Pressure Laminate, Timber and Zinc. Utilising our purpose developed software program we can provide structural calculations and assist with the design for each specific project, backed up with rigorous CWCT testing.

Secondary Support Grid system build-up: When the external facade is attached to the carrier system, allowance is made for the expansion, contraction, dead load and dynamic load. Typically, rails will span from floor to floor with a break in the vertical rail where structural deflection is required.

T and L Rail:

The T and L Rail are manufactured from high quality structural grade extruded aluminium in 6000mm lengths as standard; these can then be cut to length. Both items can be supplied with a PPC finish, or a cover trim can be supplied if required. All facades are fixed directly to the face of the carrier as per the facade manufacturers’ recommendations. The versatility of the Matrix T Carrier Secondary Support Grid System allows vertically orientated facades to be attached using the CNC pressed Z rail where required.

Brackets:

Brackets are manufactured from 3mm Aluminium and consist of 3 types, supplied with a minimum arm length of 90mm in increments of 20mm upwards to 350mm. All bracket types may be fixed to varying substrates including Steel, Block Work, Concrete and Timber.

Thermal Isolator Pads:

Thermal break isolator pads may be supplied where required to your secondary support grid. They feature low thermal conductivity, optional pre-punched pads and all are manufactured from rigid PVC.

FEATURED CASE STUDY

Pinnacle House

This stylish development in central London comprises of Apartments, Penthouses and Mews Houses; sympathetically crafted around the retained facade of a former bakery with hidden communal gardens.

Other PSP Aluminium Systems

1-lyric-hammersmith-13.09.19-62-of-100

Curtain Walling

At PSP we ensure that we work in close partnership with both our customers and suppliers to build lasting working relationships which allow us to provide the best engineering solutions to meet your current and future needs.
Sesame_01_3IX6zgP-sesame-apartments

Windows

At PSP we ensure that we work in close partnership with both our customers and suppliers to build lasting working relationships which allow us to provide the best engineering solutions to meet your current and future needs.
gallery-Caxton-Works-22-of-364-752x500

Bespoke

At PSP we ensure that we work in close partnership with both our customers and suppliers to build lasting working relationships which allow us to provide the best engineering solutions to meet your current and future needs.
FEATURED CASE STUDY

Want more information?

In addition to our standard Rainscreen Cladding Systems, PSP specialise in the design, engineering and manufacture of bespoke fabrications in a range of A1 & A2 fire rated materials such as steel, aluminium, copper, zinc and brass.
Why not give our technical sales team a call on 01388 770490 to discuss your project?
Scroll to Top